Our product are present as third-party on following pages:


Uprog portable Gang 4x / USB

Uprog portable Gang 4x - the new, universal and extreme fast device programmers. Thanks to USB 2.0 interface and specialized microprocessor we achived short programming times close to vendor's maximum ratings. Its one of fastest IC programmers on world's market.
The programmer consists of four independent programming modules, each of them provides 48 fully universal pin-drivers - it provides a possibility of use defferent package adapters within one programmer. Wide range of supply and programming voltages ensures that future low-voltage devices will be supported. Full independence of programming modules additionaly increases efficiency of programmer - each module starts independently on the status of other programming modules (concurent, asynchronous programming). Each module provides in-circuit programming connector.

Key features

  • Two operation modes: stand-alone and standard PC-hosted.
  • Four independent programming modules in one case.
  • USB interface - USB 2.0 (HighSpeed and FullSpeed) and USB 1.1 compatible
  • LCD display and keyboard
  • Specialized FPGA based microprocessor (20 ns cycle).
  • One of fastest programmers on the world's market, programming times close to vendor's maximum ratings.
  • Four in-circuit programming connectors (ICP).
  • 4x48-pins universal independent pindrivers which can provide VPP: 0-30V, VCC: 0.8 - 8V, CLK: ~360Hz-24MHz, GND
  • No adapter required for any DIL devices.
  • Compact Flash card as data depository.
  • Devices supported: EPROM, EEPROM, Flash, SPLD, CPLD, microcontrollers.
  • Adapter Creator feature allows to use many adapters from different providers.
  • Pin contact check feature
  • Test of digital ICs
  • 8-bit EPROM/Flash simulator (option)
  • 16-bit EPROM/Flash simulator (option)
  • Ulogic - Uprog based logic analyzer with pattern generator feature (option)
  • Multi color status LEDs: power, busy, error, good.
  • Banana jack on the case for grounding purpose and ESD protection.
  • Software for Windows 2000/XP/Vista supports many independent programmers simultaneously.


Uprog Gang 4x / USB

Uprog Gang 4x - the new series of universal and extreme fast device programmers. Thanks to USB 2.0 interface and specjalized microprocessor we achived short programming times close to vendor's maximum ratings. Its one of fastest IC programmers on world's market.
The programmer consists of four independent programming modules, each of them provides 48 fully universal pin-drivers - it provides a possibility of use defferent package adapters within one programmer. Wide range of supply and programming voltages ensures that future low-voltage devices will be supported. Full independence of programming modules additionaly increases efficiency of programmer - each module starts independently on the status of other programming modules (concurent, asynchronous programming). Each module provides in-circuit programming connector.

Key features

  • Four independent programming modules in one case.
  • USB interface - USB 2.0 (HighSpeed and FullSpeed) and USB 1.1 compatible
  • Specialized FPGA based microprocessor (20 ns cycle).
  • One of fastest programmers on the world's market, programming times close to vendor's maximum ratings.
  • Four in-circuit programming connectors (ICP).
  • 4x48-pins universal independent pindrivers which can provide VPP: 0-30V, VCC: 0.8 - 8V, CLK: ~360Hz-24MHz, GND
  • No adapter required for any DIL devices.
  • Devices supported: EPROM, EEPROM, Flash, SPLD, CPLD, microcontrollers.
  • Adapter Creator feature allows to use many adapters from different providers.
  • Pin contact check feature
  • Test of digital ICs
  • 8-bit EPROM/Flash simulator (option)
  • 16-bit EPROM/Flash simulator (option)
  • Ulogic - Uprog based logic analyzer with pattern generator feature (option)
  • Multi color status LEDs: power, busy, error, good.
  • Banana jack on the case for grounding purpose and ESD protection.
  • Software for Windows 2000/XP/Vista supports many independent programmers simultaneously.


Uprog portable / USB

Uprog portable - the new series of universal and extreme fast device programmers. Thanks to USB 2.0 interface and specjalized microprocessor we achived short programming times close to vendor's maximum ratings. Its one of fastest IC programmers on world's market. Uprog portable is able to working in High Speed and Full Speed mode. Thanks to usage Compact Flash card programmer can work in stand alone mode without posibillity of usinng PC computer. Uprog portable support all sizes of Compact Flash cards, since big data files can be supported, what is especially important when big NAND flash memories has to be programmed.

Key features

  • Two operation modes: stand-alone and standard PC-hosted.
  • USB interface - USB 2.0 (HighSpeed and FullSpeed) and USB 1.1 compatible
  • LCD display and keyboard
  • Specialized FPGA based microprocessor (20 ns cycle).
  • One of fastest programmers on the world's market, programming times close to vendor's maximum ratings.
  • In-circuit programming connector (ICP).
  • 48-pins universal independent pindrivers which can provide VPP: 0-30V, VCC: 0.8 - 8V, CLK: ~360Hz-24MHz, GND
  • No adapter required for any DIL devices.
  • Compact Flash card as data depository.
  • Devices supported: EPROM, EEPROM, Flash, SPLD, CPLD, microcontrollers.
  • Adapter Creator feature allows to use many adapters from different providers.
  • Pin contact check feature
  • Test of digital ICs
  • 8-bit EPROM/Flash simulator (option)
  • 16-bit EPROM/Flash simulator (option)
  • Ulogic - Uprog based logic analyzer with pattern generator feature (option)
  • Multi color status LEDs: power, busy, error, good.
  • Banana jack on the case for grounding purpose and ESD protection.
  • Software for Windows 2000/XP/Vista supports many independent programmers simultaneously.


Uprog / USB

Uprog - the new series of universal and extreme fast device programmers. Thanks to USB 2.0 interface and specialized microprocessor we achived short programming times close to vendor's maximum ratings. Uprog is able to working in High Speed and Full Speed modes. Its one of fastest IC programmers on world's market.

Key features

  • USB interface - USB 2.0 (HighSpeed and FullSpeed) and USB 1.1 compatible
  • Specialized FPGA based microprocessor (20 ns cycle).
  • One of fastest programmers on the world's market, programming times close to vendor's maximum ratings (random patterns).
  • In-circuit programming connector (ICP).
  • 48-pins universal independent pindrivers which can provide VPP: 0-30V, VCC: 0.8 - 8V, CLK: ~360Hz-24MHz, GND
  • No adapter required for any DIL devices.
  • Devices supported: EPROM, EEPROM, Flash, SPLD, CPLD, microcontrollers.
  • Adapter Creator feature allows to use many adapters from different providers.
  • Pin contact check feature
  • Test of digital ICs
  • 8-bit EPROM/Flash simulator (option)
  • 16-bit EPROM/Flash simulator (option)
  • Ulogic - Uprog based logic analyzer with pattern generator feature (option)
  • Multi color status LEDs: power, busy, error, good.
  • Banana jack on the case for grounding purpose and ESD protection.
  • Software for Windows 2000/XP/Vista supports many independent programmers simultaneously.


Uprog ST / USB

Uprog ST - the new series of universal and extreme fast device programmers. Thanks to USB 2.0 interface and specialized microprocessor we achived short programming times close to vendor's maximum ratings. Uprog is able to working in High Speed and Full Speed modes. Its one of fastest IC programmers on world's market.

Key features

  • USB interface - USB 2.0 (HighSpeed and FullSpeed) and USB 1.1 compatible
  • Specialized FPGA based microprocessor (20 ns cycle).
  • One of fastest programmers on the world's market, programming times close to vendor's maximum ratings (random patterns).
  • In-circuit programming connector (ICP).
  • 48-pins universal independent pindrivers which can provide VPP: 0-30V, VCC: 0.8 - 8V, CLK: ~360Hz-24MHz, GND
  • No adapter required for any DIL devices.
  • Devices supported: EPROM, EEPROM, Flash, SPLD, CPLD, microcontrollers.
  • Adapter Creator feature allows to use many adapters from different providers.
  • Pin contact check feature
  • Test of digital ICs
  • 8-bit EPROM/Flash simulator (option)
  • 16-bit EPROM/Flash simulator (option)
  • Ulogic - Uprog based logic analyzer with pattern generator feature (option)
  • Multi color status LEDs: power, busy, error, good.
  • Banana jack on the case for grounding purpose and ESD protection.
  • Software for Windows 2000/XP/Vista supports many independent programmers simultaneously.
  • Limited device list - programmer Uprog ST supports about 20% devices less than Uprog


Uprog LE / USB

Uprog LE - supports basic range of programmable devices. Its 48 universal pin-drivers allow using any 48-pin adaptrers for non-DIP packages. Built-in in-system programming connector enables the programmer to program ISP capable chips in circuit.

Key features

  • USB interface - USB 2.0 (FullSpeed only) and USB 1.1 compatible
  • Specialized FPGA based microprocessor (20 ns cycle).
  • In-circuit programming connector (ICP).
  • 48-pins universal independent pindrivers which can provide VPP: 0-30V, VCC: 0.8 - 8V, CLK: ~360Hz-24MHz, GND
  • No adapter required for any DIL devices.
  • Devices supported: basic range of EPROM, EEPROM, Flash, microcontrollers up to 48 pins.
  • Adapter Creator feature allows to use many adapters from different providers.
  • Pin contact check feature
  • Test of digital ICs
  • 8-bit EPROM/Flash simulator (option)
  • 16-bit EPROM/Flash simulator (option)
  • Ulogic - Uprog based logic analyzer with pattern generator feature (option)
  • Multi color status LEDs: power, busy, error, good.
  • Banana jack on the case for grounding purpose and ESD protection.
  • Software for Windows 2000/XP/Vista supports many independent programmers simultaneously.
  • List of supported devices limited to basic set of programable devices


Uprog ICP / USB

Uprog ICP - new, flexible and powerful programmer designed to in-circuit programming tasks. Powered through USB, Uprog ICP does not require external power supplier and supports wide range of integrated circuits: microcontrollers (8051, PIC, AVR, MSP430, ARM, ST72, etc.), serial EEPROMs & flash (I2C, SPI, Microwire, 1-wire, etc.), CPLD & FPGA. Target device can be powered by the programmer (5V down to 1.8V), programming voltage up to 14V can be also provided.
Thanks to USB 2.0 interface and specialized microprocessor we achived short programming times close to vendor's maximum ratings. Uprog is able to working in High Speed and Full Speed modes.

Key features

  • designed to in-circuit programming tasks
  • USB interface - USB 2.0 (HighSpeed and FullSpeed) and USB 1.1 compatible
  • USB powered
  • Short programming times thanks specialized FPGA based microprocessor (20 ns cycle).
  • Pin contact check feature
  • Ulogic - Uprog based logic analyzer with pattern generator feature (option)
  • Multi color status LEDs: power, busy, error, good.
  • Software for Windows 2000/XP/Vista supports many independent programmers simultaneously.
  • compact case: 110mm x 70mm x 25mm
  • additional board with ZIF socket - Uprog ICP Programming Socket (option)


Uprog 84 / LPT

More details

Programmer Uprog 84 is currently the most universal device in our offer. It is composed of two modules: base and exchangeable pods.

Key features

  • Universal programmer.
  • Modular construction, exchangeable pods (DIP48/PLCC84, DIP48/SOIC44, GANG).
  • Devices supported: EPROM, EEPROM, Flash, SPLD, CPLD, microcontrollers.
  • In circuit programming capabilities (JTAG, SPI, Microwire, etc).
  • 84-pins powerful pindrivers.
  • Universal socket DIP 48.
  • Universal socket PLCC 84 or SOIC 44 (TSOP II).
  • Universal digital IC tester.
  • Auto Run button for continuous programming
  • Interface with PC through pronter port (ECP, EPP or SPP mode).
  • Adapter Creator feature allows to use many adapters from different providers.
  • Software for Windows Win98/ME/2000/NT/XP.


Uprog 48 / LPT

More details

Uprog 48 is universal device programmers family. Graphical interface of Uprog software is very confortable in usage for programming and testing tasks. Uprog programmers have 100% universal programming ZIF48 socket. They allow to put independly on any pin programming voltage (0-30V), power supply (1.8-8V), ground or clock, so this flexibility allow Uprog programmers to handle any device. Uprog 48: wide device list, expansion possibilities - SPA, etc.

Key features

  • Interface with PC through LPT port (EPP or SPP mode).
  • 48 pin ZIF socket with universal pin drivers.
  • No adapter required for any DIL devices.
  • Universal adapters available for PLCC, SOIC and TSOP devices up to 48 pins.
  • Device insertion and pin-contact check.
  • FPGA based microcontroller for very fast programming.
  • In circuit programming capabilities (JTAG, SPI, Microwire, etc).
  • Supports standard 5V and low voltage devices down to 1.8V.
  • Universal digital IC tester.
  • Auto Run button for continuous programming.
  • Adapter Creator feature allows to use many adapters from different providers.
  • Software for Windows Win98/ME/2000/NT/XP.
  • Free technical support and software updates from the Internet.


Uprog 40 / LPT

More details

Uprog 40 is universal device programmers family. Graphical interface of Uprog software is very confortable in usage for programming and testing tasks. Uprog programmers have 100% universal programming ZIF40 socket. They allow to put independly on any pin programming voltage (0-30V), power supply (1.8-8V), ground or clock, so this flexibility allow Uprog programmers to handle any device. Expansion possibilities: interface for in-circuit serial programming (SPA).

Key features

  • Interface with PC through LPT port (EPP or SPP mode).
  • 40 pin ZIF socket with universal pin drivers.
  • No adapter required for any DIL devices up to 40 pins.
  • Device insertion and pin-contact check.
  • FPGA based microcontroller for very fast programming.
  • In circuit programming capabilities (JTAG, SPI, Microwire, etc).
  • Supports standard 5V and low voltage devices down to 1.8V.
  • IC testing capabilities.
  • Programs IC like: EPROM, EEPROM, Flash, micrcontrollers, PLD/CPLD.
  • Auto Run button for continuous programming.
  • AUTO EPROM or FLASH detecting
  • Accepts following data formats: HEX, BIN, Text, JED, JAM (STAPL), SVF, ROM, POF.
  • Adapter Creator feature allows to use many adapters from different providers.
  • Software for Windows Win98/ME/2000/NT/XP.
  • Free technical support and software updates from the Internet.


Uprog LITE / LPT

More details

Uprog LITE is a low cost universal IC programmer dedicated for a wide range of different devices including EPROMs, EEPROMs, Flash memories, GAL, PAL, CPLD, and microcontrollers. Uprog LITE has build-in interface for in-circuit programming via SPI, JTAG and others. To reduce programmer hardware and provide as cheap universal programmer as possible, we have introduced new, innovative Finger Drive™ technology.

Key features

  • Universal 48 pin ZIF socket based on Finger Drive technology.
  • Universal adapters available for PLCC, SOIC, TSOP, etc. up to 48 pins.
  • No adapter required for any DIL devices.
  • FPGA based microcontroller for very fast programming.
  • Build in interface for in-circuit programming (SPI, JTAG, Microwire, BDM, etc.)
  • Device insertion and pin-contact check.
  • Supports standard 5V and low voltage devices down to 1.8V.
  • Short programming and verification times.
  • Interface with PC through LPT port (EPP or SPP mode).
  • Modular software, available libraries for:
    8/16-bit memories, PLDs, microcontrollers, serial flash and EEPROMs and many others.
  • Adapter Creator feature allows to use many adapters from different providers.
  • Software for Windows Win98/ME/2000/NT/XP.
  • Free technical support and software updates from the Internet.
  • Very attractive price

 

Universele Uprog programmer serie

 

Universal programmers Uprog


Downloads

RK-SYSTEM - Download section

Programmers
Uprog 2 software
  37.2MB, updated: 2011-02-24 10:42
Download
Uprog 2 software (previous release)
  37.1MB, updated: 2011-01-24 09:42
Download
Uprog software for USB programmers
  9.1MB, updated: 2010-04-09 13:09
Download
Uprog software for USB programmers (previous release)
  9MB, updated: 2010-03-14 12:47
Download
Uprog software for LPT programmers
  28.4MB, updated: 2010-03-14 12:47
Download
Uprog software for LPT programmers (previous release)
  File temporarily unavailable.
USB driver (Uprog 2)
  18.3kB, updated: 2010-03-14 12:47
Download
USB driver (Uprog)
  765.3kB, updated: 2010-12-15 10:02
Download
LPT driver (Uprog)
  219.5kB, updated: 2010-03-14 12:47
Download
Uprog - user's manual
  1.1MB, updated: 2010-03-14 12:47
Download
Uprog - universal programmers (USB)
  2MB, updated: 2010-03-14 12:47
Download
Uprog - universal programmers (LPT)
  2.3MB, updated: 2010-03-14 12:47
Download
Universal programmer UprogHS 48 portable
  119.7kB, updated: 2010-03-14 12:47
Download

Measurement tools
Software for DAQ tools
  4.8MB, updated: 2010-05-12 09:18
Download
Software for DAQ tools (previous release)
  4.6MB, updated: 2010-03-14 12:47
Download
USB driver (DAQ tools)
  765.3kB, updated: 2010-11-08 10:20
Download
DAQ series tools - Operating manual
  1.4MB, updated: 2010-03-14 12:47
Download
DAQLib Programmer's Reference. Documentation and C++ sample.
  1MB, updated: 2010-03-14 12:47
Download
ScopeLogicDAQ - USB complete data acquisition system, product brochure
  116.8kB, updated: 2010-03-14 12:47
Download
LogicDAQ - USB 32-channel Logic Analyzer, product brochure
  84.5kB, updated: 2010-03-14 12:47
Download
ScopeDAQ - USB Digital Oscilloscope, product brochure
  69.3kB, updated: 2010-03-14 12:47
Download
PenScopeDAQ - pen-type digital oscilloscope, product brochure
  61.6kB, updated: 2010-03-14 12:47
Download
DAQ Family Tools - USB data acquisition systems
  113.6kB, updated: 2010-03-14 12:47
Download

Vibration analysis
VibroDAQ, vibro-diagnostic and balancing system (brochure)
  677.8kB, updated: 2010-03-14 12:47
Download

Tools
Updater - software updates (version 1.6.5.24).
  926.3kB, updated: 2010-04-19 13:09
Download

Other
PDF file viewer PDF viewer
Mozzilla Firefox Internet browser Firefox
Use OpenOffice.org Use OpenOffice.org
 
 
 PRIJS LIJST Uprog serie V2.76 Mei  2011
 
Artikel NR: Omschrijving: Standaard meegeleverd of option: Prijs Excl BTW
 
60-PU06 Uprog GANG portable x4     

2.000 EURO

60-OP02 *8 bit simulator Option

54 EURO

60-OP01 Tester IC YES

–

60-OP07 Compact Flash Card 1GB YES

–

60-OP03 *16 bit simulator Option

54 EURO

60-OP04 *Ulogic (included are 16 x test probes [typica] for Ulogic analyzer) Option

189 EURO

60-OP05 *Serial Programming adapter YES

–

60-OP06 *Memory 512KB Option

54 EURO

60-OP08 Additional set 8 x test probes for Ulogic analyzer Option

24 EURO

60-OP09 Additional set 8 x high quality test probes for Ulogic analyzer Option

39 EURO

60-PU05 Uprog GANG x4  

1.670 EURO

60-OP02 *8 bit simulator Option

54 EURO

60-OP01 Tester IC YES

–

60-OP03 *16 bit simulator Option

54 EURO

60-OP04 *Ulogic (included are 16 x test probes [typica] for Ulogic analyzer) Option

189 EURO

60-OP05 *Serial Programming adapter YES

–

60-OP06 *Memory 512KB Option

54 EURO

60-OP08 Additional set 8 x test probes for Ulogic analyzer Option

54 EURO

60-OP09 Additional set 8 x high quality test probes for Ulogic analyzer Option

39 EURO

 
60-PU04 Uprog portable  

729 EURO

60-OP02 *8 bit simulator Option

55 EURO

60-OP01 Tester IC YES

–

60-OP07 Compact Flash Card 1GB YES

–

60-OP03 *16 bit simulator Option

55 EURO

60-OP04 *Ulogic (included are 16 x test probes [typica] for Ulogic analyzer) Option

189 EURO

60-OP05 *Serial Programming adapter YES

–

60-OP06 *Memory 512KB Option

54 EURO

60-OP08 Additional set 8 x test probes for Ulogic analyzer Option

29 EURO

60-OP09 Additional set 8 x high quality test probes for Ulogic analyzer Option

39 EURO

 
60-PU03 Uprog  

619 EURO

60-OP02 *8 bit simulator Option

54 EURO

60-OP01 Tester IC YES

–

60-OP03 *16 bit simulator Option

54 EURO

60-OP04 *Ulogic (included are 16 x test probes [typica] for Ulogic analyzer) Option

189 EURO

60-OP05 *Serial Programming adapter YES

–

60-OP06 *Memory 512KB Option

54 EURO

60-OP08 Additional set 8 x test probes for Ulogic analyze Option

29 EURO

60-OP09 Additional set 8 x high quality test probes for Ulogic analyzer Option

39 EURO

 
60-PU02 Uprog ST  

470 EURO

60-OP02 *8 bit simulator Option

54 EURO

60-OP01 Tester IC YES

–

60-OP03 *16 bit simulator Option

54 EURO

60-OP04 *Ulogic (included are 16 x test probes [typica] for Ulogic analyzer) Option

189 EURO

60-OP05 *Serial Programming adapter YES

–

60-OP06 *Memory 512KB Option

54 EURO

60-OP08 Additional set 8 x test probes for Ulogic analyzer Option

29 EURO

60-OP09 Additional set 8 x high quality test probes for Ulogic analyzer Option

39 EURO

 
60-PU01 Uprog LE USB  

290 EURO

60-OP02 *8 bit simulator Option

54 EURO

60-OP01 Tester IC YES

–

60-OP03 *16 bit simulator Option

54 EURO

60-OP04 *Ulogic (included are 16 x test probes [typica] for Ulogic analyzer) Option

189 EURO

60-OP05 *Serial Programming adapter YES

–

60-OP06 *Memory 512KB Option

54 EURO

60-OP08 Additional set 8 x test probes for Ulogic analyzer Option

29 EURO

60-OP09 Additional set 8 x high quality test probes for Ulogic analyzer Option

39 EURO

 
60-PU07 Uprog ICP  

173 EURO

60-OP08 *Ulogic (included are 16 x test probes [typica] for Ulogic analyzer) Option De Uprog ICP kan ook besteld worden als
alleen geschikt voor Logic Analyzer

173 EURO

60-OP10 ZIF socket board Option

49 EURO

 
60-PU08 Uprog LITE ( Meegeleverd word 1library – U kunt vooraf opgevven welk library u wenst)

135 EURO

60-OP05 *Serieel Programmeer adapter Ja -
60-LIB1 Serial EEPROMs Option

60 EURO

60-LIB2 8051 family MCUs Option

60 EURO

60-LIB3 ATMEL AVR Option

60 EURO

60-LIB4 16-bit memories (EPROM, EEPROM, FLASH) Option

60 EURO

60-LIB5 8-bit memories (EPROM, EEPROM, FLASH) Option

60 EURO

60-LIB6 PLD devices Option

60 EURO

60-LIB7 Microchip PIC (10-16) Option

60 EURO

60-LIB8 Microchip PIC (17-18) Option

60 EURO

60-LIB9 ST62 microcontrollers Option

60 EURO

60-LIB10 ST62 microcontrollers Option

60 EURO

 
    PRIJS LIJST Uprog serie V2.42 Maart  2010    
Artikel nr:  Omschrijving: Standaard - meegeleverd: Prijs Excl BTW
       
60-PUU01 Uprog 40 LPT1 (printer parallel poort)   € 299,00
60-OP01 Tester IC YES  
60-OP05 *Serial Programming adapter Option € 83,58
  Device list: http://www.rk-system.com.pl/uprog/dluprog40.html    
       
  Other adapters on request    
       
  * Uitleg    
  *Ulogic    
  Logic analyzer on Uprog    
  *Memory 512KB    
  Internal memory upgrade to  512KB, (in standard programmer has  128KB)    
  *Serial Programming adapter    
  JTAG, SPI, 3 wire, BDM programming  module (for in-circuit programming)    
  *Symulator 16bit    
  16 bit. Flash/EPROM simulator, memory sizes up to 64kB (or 256kB if internal memory upgrated  to 512kB), acces time ~70ns    
  *Symulator 8 bit    
  8 bit. Flash/EPROM simulator, memory sizes up to 128kB (or 512kB if internal memory upgrated  to 512kB), acces time ~ 10ns    
       
       
  Measurement tools    
       
       

 

Website van de fabrikant.                                                                             Overzichtsfolder

E-Mail voor vragen aan DDS Programmers

(C) 2011 DDS Electronics Europe BV  Alle rechten voorbehouden.
                                                                                                                                                                                            
( TUSSENTIJDSE PRIJSWIJZIGINGEN VOORBEHOUDEN )